Alumon Dark Brown A2RL
(Technical Data Sheet)
Alumon Dark Brown A2RL is a dye in powder form and gives dark brown shade on aluminum, which is distinguished by good fastness to light, Weather and heat.
Chemical Properties:
Physical Form : Dry Powder
Appearance : Dark Brown Powder
Chemical Class : Metalized azo dye.
Light Fastness : Good
Heat Fastness : Good
Anodizing recommendation :
Applicable condition are as:
Coating Thickness : 12 - 25 microns
Concentration : 4 - 5 g/l
Temperatures : 55 – 60 C
pH : 5.5 +- 0.5
Buffer : the bath must be buffered with
8 g/l sodium acetate tri hydrate
0.4 ml/l acetic acid for pH 5.5
Time : 10-15 Minute.
Water Quality : preferably de –ionized;
SEALING:
The dyed oxide film must be properly sealed properly using a hot sealing salt ANO SEAL CA-350 for best result.
Other Recommendation:
1) Ammonium compounds shall not be used for controlling of the pH or to buffer dye
bath solution.
2) The presence of ammonium compounds in the sealing solution may cause
leaching and loss of color.
3) Use sodium acetate for dye buffer.
4) Adequate care to be taken for proper rinsing to control drag-in for optimum tank life.
5) Dye may be dissolved separately outside the dye bath. Use demineralized water for
better dye bath stability.
6) The life of dye bath is reduced by water containing ammonium.